Densifier Pro Plus WPS-600WB
A non-hazardous, densifier, hardener, and water proofing sealer for new and existing concrete surfaces. Treated surfaces are resistant to water damage and surface abrasion/cracking while reducing dusting and simplifying maintenance.
A non-hazardous, densifier, hardener, and water proofing sealer for new and existing concrete surfaces. Treated surfaces are resistant to water damage and surface abrasion/cracking while reducing dusting and simplifying maintenance.
A non-hazardous, densifier, hardener, and water proofing sealer for new and existing concrete surfaces. Treated surfaces are resistant to water damage and surface abrasion/cracking while reducing dusting and simplifying maintenance.
WPS-600 is a multi-phase penetrating lithium-colloidal based proprietary silicate treatment that reacts with concrete to produce insoluble calcium silicate hydrate that locks aggregate together and fills vacant concrete pores strengthening and hardening concrete while building a water-resistant matrix. WPS-600 will not contribute to surface ASR (Alkali Silicate Reaction).
The tetrahedral silicate monomer technology incorporated in WPS-600 provides water repellant protection superior to silane and siloxane emulsions, silicates, petroleum distillates and other common water repellants.
-
Easy, one step application. No scrubbing. No flushing. No caustic wastewater.
May be applied to broom finished, steel troweled, power troweled or burnished concrete finishes.
Penetrates and reacts quickly to produce better initial and ultimate hardness.
Provides better abrasion resistance than conventional hardeners.
Produces a fast surface gloss which improves with traffic and maintenance.
Improves performance, appearance and light reflectance of new or old concrete.
-
Gunite Pools
Raised Walls
Shower Pans
-
Full cure 48 hours
May slightly darken
Apply two saturation coats wet on wet
Safe, easy to apply
-
The following coverage rates are offered for estimating only. See below for instructions on calculating projectspecific target coverage rates.
Freshly Placed, Uncured, Steel Troweled Concrete · 600–1000 square feet per US gallon
Cured, Steel Troweled Concrete · 500–900 square feet per US gallon
Cured, Ground/Honed Concrete · 400–800 square feet per US gallon
-
Typically Outdoors
Horizontal and Vertical
-
One Gallon Bottles
Five Gallon Bottles
This product is compliant with the following national, state, and district AIM VOC regulations, US environmental Protection Agency, California Air Resources Board SCM Districts, South Coast Air Quality Management Districts, Maricopa County AZ, and Northeast Ozone Transport Commission.
