Low Sheen Wet-Look WPW-350
WPW-350 is a breakthrough formulation that cures with a low sheen, rich wet look.
WPW-350 is a breakthrough formulation that cures with a low sheen, rich wet look.
WPW-350 is a breakthrough formulation that cures with a low sheen, rich wet look.
The advanced formula of Low Sheen Wet-Look forms an uncompromising barrier that resists penetration from water, salt, pool chemicals, oils, vehicle liquids and more. WPW-350 can be applied with a pump up sprayer.
WPW-350 can be used on previously coated or uncoated interior or exterior surfaces such as pavers, concrete products, slate, Mexican tile, unglazed tiles, brick, aggregate, natural and artificial stone (flagstone, moss rock, Cantera, travertine), masonry, stucco, and wood.
-
Breathable
Stain Resistant
Durable
Great Look
Economical
Safe, Solvent Based
-
Natural Stone
Non-Glazed Tile
Non-Glazed Masonry
Concrete
Artificial Stone
-
Cures in 30 to 40 minutes
Enhancing, Rich Wet Look
Single or Multiple Coats
Gloss Finish
Safe, Easy to Apply
-
Coverage varies based on porosity and texture. Always test.
Porous Surfaces: will vary depending on porosity of the surface; typical 175 – 250 sq. ft. / gallon
Non-Porous Surfaces: 300 – 425 sq. ft. / gallon
-
Indoors and Outdoors
Horizontal and Vertical
-
Quart Bottles
One Gallon Bottles
Five Gallon Pails
This product is restricted in large quantities to the following VOC regulated states: California, Connecticut, Rhode Island, Maine, Massachusetts, New Hampshire, Vermont, Delaware, District of Columbia, Maryland, New Jersey, New York, Northern VA, Pennsylvania, Parts of Arizona, Ohio, Illinois, Indiana. In addition, these counties in California: LA County, Riverside County, Orange County, San Bernardino County.
